• Wide Input Range: 4.5V-40V
• Up to 600mA Continuous Output Current
• Less than 0.1% Output Ripple at 12V Output
• 0.8V ± 2.5% Feedback Reference Voltage
• Integrated 600mΩ High-Side 300mΩ LowSide Power MOSFETs
• Fixed Frequency 1.2MHz
• Pulse Skipping Mode (PSM) at Light Load
• 90uA Quiescent Current in Sleep Mode
• 100ns Minimum On-time
• 1ms Internal Soft-start Time
• Over-Temperature Protection
• Available in an TSOT23-6 Package

The SCT2401 is a high frequency, up to 600mA continuous output synonous buck converter. It has wide input voltage rating from 4.5V to 40V, which integrates a 600mΩ high-side MOSFET a 300mΩ low-side MOSFET. The SCT2401, adopts the peak current mode control with built-in loop compensation to make the chip easy to use.  The SCT2401 features fixed 1.2MHz switching frequency, which minimizes the external off chip passive components size reduces the output ripple to be lower than 0.1% of output when the output is 12V. With a minimum 100ns on-time of high-side MOSFET, the SCT2401 allows power conversion from high input voltage to low output voltage. The SCT2401 supports the Pulse Skipping Modulation (PSM) with typical 90uA low quiescent current. It achieves 85% power efficiency at 10mA light load condition.  The SCT2401 offers cycle-by-cycle current limit, thermal shutdown protection input voltage undervoltage protection. The device is available in a 6-pin small profile TSOT23-6 package. 

Application:

• Industrial 24V Distributed Power Bus 
• Power meter 
• Elevator, PLC, Servo 
• Automatic Control 
• Automotive 

Parameter list

Technical information